Diversified Woodcrafts' Double-Faced Student Service Island provides efficient study and work space for 16 science students. In this configuration, four units are grouped together, each containing a solid epoxy resin sink with two water/gas fixtures. The chemical and heat-resistant top is available in your choice of solid epoxy resin or phenolic resin (see below). Other features include eight locking storage cabinets, GFI AC duplex electrical receptacles, rod sockets and book compartments. The solid oak and hardwood veneer construction will stay beautiful through years of science experiments. And a chemical-resistant UV finish and rubber base molding protect this science workstation from corrosive spills and moisture.
- Workspace for 16 students
- Chemical and heat-resistant countertop
- Four solid epoxy resin sinks with water/gas features
- Eight locking storage cabinets
- Base material: Solid oak and oak/hardwood veneers
- Tabletop material: 1" solid epoxy resin or 1" solid phenolic resin (see below)
- Height: 36"
- Width: 48"
- Length: 264"
- Sink dimensions: 12" x 8" x 6"
- Warranty: Lifetime limited
- Fully assembled
1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black.
1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black.