Octagon Workstation - Pedestal Base - 56"W
Diversified Woodcrafts' Octagon Workstation provides storage and work space for up to four students. This lab station's pedestal base utilizes floor space and provides ample leg room. Features include an epoxy resin sink with two water/gas fixtures, four rod sockets and four GFI electrical receptacles. Four locking storage drawers around the perimeter keep classroom supplies secure. The tabletop is available in your choice of solid epoxy resin or phenolic resin (see below). The base is constructed of solid oak and hardwood veneers with a chemical resistant finish. Rubber molding protects the unit from moisture and chemical spills.
- Workspace for four students
- Chemical and heat resistant tabletop (see below)
- Sink with two water/gas fixtures
- Four locking drawers
- Four GFI AC electrical receptacles
- Four rod sockets (rods not included)
- Base material: Solid oak and oak veneer
- Tabletop material: 1" solid epoxy resin or 1" solid phenolic resin
- Height: 36"
- Width: 56"
- Sink dimensions: 16" W x 16" D x 7" H
- Drawer dimensions: 18" W x 11" D x 3 1/2" H
- Warranty: Limited lifetime
- Assembly required
1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black.
1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black.