Adjustable Height Science Table - 30"W x 60"L x 27"-39"H
Volume discounts available.
Diversified Woodcrafts' Adjustable-Height Science Table is a versatile and durable addition to your science lab. Each leg easily adjusts from 27" to 39" high in two centimeter increments, so the wheelchair-accessible table meets ADA requirements. Raise the height of just one side to create an incline for physics experiments. The stylish steel legs resist most chemicals and feature black rubber leg boots. A 4 1/2" thick solid oak apron supports the tabletop in your choice of three materials – 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) or 1" Phenolic Resin (best). See a complete description of each surface type below the Specifications. This Diversified Woodcrafts 30"W x 60"L Adjustable-Height Science Table comes backed by a limited lifetime warranty.
- Choose from three surface materials (see descriptions below)
- Solid oak apron
- Adjust the height of each leg from 27" to 39"
- Meets ADA requirements
- Black rubber boots protect table legs
- Backed by a limited lifetime warranty
- Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) or 1" Phenolic Resin (best)
- Apron Material: Solid oak
- Apron Finish: Clear, earth-friendly UV coat
- Leg Material: Steel
- Width: 30"
- Length: 60"
- Height: 27" - 39"
- Warranty: Limited lifetime
Selecting Table Tops
When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings.
1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black.
1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black.
1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black.