EZ-Lift Workstation - 96"W x 50"D x 28"-40"H
Diversified Woodcrafts' EZ-Lift Workstation is easily adjusted with a fold-away crank shaft to accommodate students' varying needs. In just seconds, you can change the height from 28" to 40". Students will have plenty of space to conduct science experiments on the durable epoxy resin or phenolic resin (see below) tabletop. Two hooks mounted under the work surface hold up to four book bags, and six GFI protected electrical outlets provide power. The fold-away crank is concealed by the powder-coated steel and oak veneer base. And a chemical resistant finish protects the EZ-Lift Workstation from hazardous spills.
- Fold-away crank shaft for easy height adjustment
- Workspace for four students
- Chemical and heat resistant tabletop (see below)
- Six GFI AC electrical receptacles
- Base material: Power-coated steel and oak veneer
- Tabletop material: 1" solid epoxy resin or 1" solid phenolic resin
- Height: 28" - 40"
- Width: 96"
- Depth: 50"
- Workspace dimensions: 96" W x 50" D
- Warranty: Limited lifetime
- Assembly required
When selecting a countertop, it's important to understand how the EZ-Lift Workstation will be used. Diversified Woodcrafts, Inc. offers two different countertop surfaces to accommodate a variety of settings.
1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black.
1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black.