Science Table w/ Book Compartments - 42"W x 54"L x 30"H
With convenient storage built right in, Diversified Woodcrafts' Science Table with Book Compartments is a durable and practical addition to your science lab. The table has sturdy solid oak legs and apron, plus adjustable leveling glides that keep your table from wobbling, a must when it comes to precise measuring. Legs attach to the table at 13-gauge steel corner braces for extra sturdiness. Black rubber leg boots protect your table from scuffs and chemical spills. Choose from four top finishes to best fit your needs – 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) and 1" Phenolic Resin (best) or 1" Solid Epoxy Resin (best). See a complete description of each surface type below the Specifications. This Diversified Woodcrafts Science Table with Book Compartments is 42"W x 54"L x 30"H and comes backed by a limited lifetime warranty.
- Four 14 1/4"W x 12 3/4"D x 3 7/8"H book compartments
- Choose from four surface materials (see descriptions below)
- Solid oak legs and apron
- 13-gauge steel corner braces
- Adjustable glides for accurate leveling
- Black rubber boots protect table legs
- Backed by a limited lifetime warranty
- Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better), 1" Phenolic Resin (best) or 1" Solid Epoxy Resin
- Leg/Apron Material: Solid oak
- Leg Size: 2 1/4" square
- Corner Braces: 13-gauge steel
- Width: 42"
- Length: 54"
- Height: 30"
- Warranty: Limited lifetime
Selecting Table Tops
When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings.
1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black.
1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black.
1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black.
1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black.